
Add to Cart
Elevator Safety Components SN-SG-OL35-NA Elevator Overspeed Governor For Medium Speed Ladder
SN-SG-OL35-NA: A17.1 compliant safety component for two-way electrical disconnection and downbound mechanical release, engaging safety pliers when overspeed is detected.
Unique Selling Point:
Trigger at any point on 360°, reaction time is short.
Friction linkage limits the force on the wire rope and prevents it from being damaged.
There are safety contacts for both up and down overspeed
shield
Hardened rope wheel reduces wear
Options
OL35NA | |
---|---|
Direction | Unidirectional |
Min. Rated Speed ft/m | 100 |
Max. Rated Speed ft/m | 500 |
Max. Travel Height (m) | 165 |
Min. Governor Brake Force (ibf) | 168 ± 56 |
Rope Diameter (d) | 3 / 8 " |
Pulley Diameter (DB) | 12" |
UCM Solution | - |
EN 81-20/50:2014 | Standard |
GOST R 53780-2010 | Standard |
China | Standard |
ASME A17.1 | Standard |
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.