PAWO F10 Elevators Gustav Wolf Wire Rope With An Increased Bending Resistance
Special full steel rope with 9 outer strands
Our specially developed PAWO F10 is for the most demanding elevator installations. The rope´s 9 strand construction allows a tight fit of the rope in the groove.
Thus, this rope offers an extremely long service life, combined with an increased bending resistance. The compact structure of the core offers additional metallic cross-section.
Properties:
- high rise
- high number of bending cycles
- heavy usage
- low stretch
- long service life
Construction: full steel rope with 9 strands, regular lay,
Technical terms of delivery to DIN EN 12385, ISO 4344
load bearing wires in the outer strands:
< 12 mm = 117
> 12 mm = 144
tensile grade 1570 N/mm2, steel wire bright or galvanized
Properties
- Low and mid-rise
- small to intermediate number of bending cycles
- normal to heavy usage levels
- wear-resistant
- low elongation
- extended service life
Construction: 8 x 19 Seale with steel-reinforced fiber core, regular lay,
Technical terms of delivery to DIN EN 12385, ISO 4344
Load-bearing wires in the outer strands: 152 Tensile grade 1570 N/mm², steel wire bright or galvanized
| rope-Ø (permissible tolerance) | |
| no load: | with load (10% of Fmin): |
| max. 3% < 10 mm | min. -1% <= 10 mm |
| max. 2% > 10 mm | min. -1% > 10 mm |
| rope diameter(mm) | calculated mass (kg/m) | min. breaking load (kN) | part-no. |
| 8 | 0,270 | 43,2 | 721208032 |
| 9 | 0,340 | 54,8 | 721209032 |
| 10 | 0,420 | 67,2 | 721210032 |
| 11 | 0,503 | 80,2 | 721211032 |
| 12 | 0,600 | 95,6 | 721212032 |
| 13 | 0,707 | 113,4 | 721213032 |
| 14 | 0,850 | 135,7 | 721214032 |
| 15 | 0,950 | 152,8 | 721215032 |
| 16** | 1,080 | 174 | 721216032 |
| 18* | 1,410 | 219,7 | 721218032 |
| 19*** | 1,510 | 244,9 | 721219032 |
| 20* | 1,700 | 272,5 | 721220032 |
| | | | |
| 9,5(3/8") | 0,380 | 60,5 | 721209530 |
| 12,7(1/2") | 0,680 | 109,5 | 721212730 |
| 17,5(11/16") | 1,300 | 208 | 721217530 |
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.
